Descargar Imprimir esta página

Skil BL4713C-00 Manual Del Propietário página 13

Soplador de hojas de 40 v sin escobillas

Publicidad

Idiomas disponibles

Idiomas disponibles

To Attach/Detach Battery Pack
WARNING
Therefore, remove the battery when assem-
bling parts, making adjustments, cleaning,
when the tool is not in use, or when carry-
ing it at your side . Removing the battery
pack will prevent accidental starting that
could cause serious personal injury.
To attach the battery pack (Fig . 4):
Align the ribs of the battery pack with the
mounting slots in the blower's battery port.
Press the battery pack toward the blower
body until it snaps into position.
NOTICE: Make sure that the latch on the
blower snaps into place and the battery pack is
secured to the tool before beginning operation.
To detach the battery pack:
WARNING
children, or pets when pressing the bat-
tery-release button. Serious injury could
result if the battery pack falls .
NEVER remove the battery pack at a high
location .
Press the battery-release button to cause
the battery pack to disengage from the latch
and the ejection mechanism will assist with
removal.
Grasp the battery pack and remove it from
the blower.
To Start/Stop the Blower
Your blower can be started or stopped in two
ways, as well as air speed adjustment.
With the Variable-Speed Trigger Switch
(Fig . 6):
Depress the variable-speed trigger switch to
turn on the blower.
The air speed of the blower is controlled
with the variable-speed trigger switch. More
pressure on the trigger results in higher
blowing speeds; less pressure on the trigger
results in lower blowing speeds. Adjust the
speed to suit the task at hand.
Release the variable-speed trigger switch to
turn off the blower.
Battery tools are always
in operating condition .
Always be aware for the
location of your feet,
Fig. 4
Fig. 5
Fig. 6
Press to release
Variable-Speed
Trigger Switch
13

Publicidad

loading