Publicidad
Idiomas disponibles
Idiomas disponibles
About ice service.
Ice Trays
To make ice, fill the ice tray with water and set
it on a level surface in the freezer compartment.
Ice cubes will form in a few hours.
To release ice cubes, turn the tray upside down,
hold it over a container and twist both ends.
Ice maker Accessory Kit
An ice maker accessory kit is available from
your dealer. The IM-4A or IM-6 accessory
kit will work with your refrigerator. To
order, go to GEApplianceparts.com or call
800.626.2002.
NOTE: The step shelf in the freezer MUST be
placed in the lowest position when the ice
maker is installed.
Water Supply Kits
Kits containing copper tubing, shutoff valve,
fittings and instructions needed to connect the
ice maker to your cold water line are available
at extra cost from your dealer or from Parts and
Accessories. In the U.S., call 800.626.2002.
For only one or two ice cubes, leave the tray
right-side up, twist both ends slightly and
remove as many cubes as you want.
do not put them in an automatic dishwasher.
The water valve cover assembly that came
with the Owner's Manual must be installed
when installing the optional ice maker
kit. Please call 1-800-432-2737 and order
part WR13X20070 if the water valve cover
assembly is missing.
GEAppliances.com
5
Publicidad
