Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
WHEN ASSEMBLING TABLE, IT IS EXTREMELY IMPORTANT THAT THE U-CLIPS (#3) BE TURNED
AS SHOWN HERE. IF U-CLIPS ARE TURNED INCORRECTLY, YOU WILL DO IRREPARABLE
DAMAGE TO YOUR TABLE WHEN YOU ATTEMPT TO OPEN IT TO THE PLAYING POSITION.
3. Align the holes in the U-clips #3 with Indentations in table top assembly
and secure with twelve screws #20 as shown. All four holes in each U-Clip
must align with four Indentations in top. See Figure 2 and Detail A.
If you want to see a video on how to position the U-Clips go to:
http://www.escaladesports.com/customer-service/videos.html
Or scan with your smartphone:
IMPORTANT:
Be sure that slot in the three U-clips #3 all face the
same direction as shown. (Toward the end of the
table with no stripe.)
20
3
3
End Rail Mounting
Indentations
Figure 2
Figure 3
Figure 3
Detail A
Slot in
U-Clip
Hardware Needed
#8 x 7/16
Sheet Metal Screw
(Qty. 12)
Publicidad
