BRINKMAN 810-8501-S Manual De Instalación página 16

Step 6
Remove screw from each burner "foot" using
a screwdriver. Carefully lift each burner up
and away from valve openings. Set aside
for later use.
Step 7
Use the gas orifice tool to remove the LP
brass orifice from main burner valves through
the hole on the firebox front panel. Repeat this
step for all main and side burner valves in your
grill. The side burner valve orifice is under the
side shelf.
CAUTION: Some parts may contain sharp
edges. Wear protective gloves
if necessary.
Step 8
Remove all the control knobs from the control
panel and set aside for later use.
15
Side View
LP Gas Orifice
Firebox Front Panel
Gas Orifice Tool