ARDES AR4H01 Instrucciones página 11

To change the heating position, press the TEMP key repeatedly until you
reach the desired level, which can be set from 1 to 6.
Please set preheating at the highest tap "6" position 10 minutes before
using, then set the desired temperature.
In case of long operating period, set position 1 in order to avoid any
overheating.
c. After 90 minutes the heating pad switches off automatically.
If symbol P appears on the display, check for proper cable connection
of both the panel and the mains socket, while if the symbol E appears, it
means that the heating pad is broken.
Press on/off key for 3 seconds to shut off when you stop to use it.
Maintenance
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
The control unit must be cleaned with a soft, slightly damp cloth.
Do not use substances, liquids or excessively dampened cloths because
any infiltrations could damage the appliance beyond repair.
NEVER IMMERSE THE CONTROL UNIT IN WATER.
The heating panel and the cover can be washed. Before washing,
remove the control unit and follow the instructions below which are also
provided on the appliance:
MAXIMUM WASHING
TEMPERATURE 40°C, MILD
PROCESS
DO NOT DRY CLEAN
DO NOT BLEACH
DO NOT WRING
11