Publicidad
I
2
1
MODE
RADIO ON / OFF / BAND
3
MODE
RADIO ON / OFF / BAND
4
1
2
3
UP
DOWN
J
1
MODE
RADIO ON / OFF / BAND
2
MODE
RADIO ON / OFF / BAND
3
1
2
UP
1,3
4
2
1
2
UP
DOWN
+5
5
4
S - BASS
1,2
3
+5
5
S - BASS
ENGLISH
PRESETTING → I
A total of 30 stations can be preset, 10 stations for each AM, FM1 and FM2 band.
1 Press the RADIO ON/OFF/BAND MODE button to select AM, FM1 or FM2.
If
is displayed in the display, keep the RADIO ON/OFF/BAND MODE button
pressed for about 2 seconds until
2 Press the UP or DOWN button to tune in to a station.
3 Keep the RADIO ON/OFF/BAND MODE button pressed for about 2 seconds
until
appears in the display.
4 Keep one of the numeric (1 – 5) buttons pressed for 1 – 2 seconds to select the
preset number. For preset number 6 and above, press and release the +5 button
first.
Example: To select preset number 8, press and release the +5 button. While "5" is
flashing, press the 3 button for 1 – 2 seconds.
To preset two or more stations, repeat the procedure from step 1.
To change the presetting
Repeat the procedure from step 1.
Listening to preset stations → J
1 Press the RADIO ON/OFF/BAND MODE button to select AM, FM1 or FM2.
2 Keep the RADIO ON/OFF/BAND MODE button pressed for about 2 seconds
until
appears in the display.
3 Press and release the numeric (1 – 5) buttons to select the desired preset number.
For preset number 6 and above, press and release the +5 button first.
Example: To select preset number 8, press and release the +5 button. While "5" is
flashing, press and release the 3 button.
After listening, press the RADIO ON/OFF/BAND MODE button repeatedly to turn off
the radio.
Note
While
is displayed, the S-BASS button functions as only +5 button. To emphasize
the low frequencies, keep the RADIO ON/OFF/BAND MODE button pressed for 2 seconds
until
disappears, then press the S-BASS button.
Caution
When selecting a preset station, DO NOT HOLD the numeric (1 – 5) buttons for
more than a second. Otherwise, currently-tuned station will be preset to that button
instead.
Frequency range and step → K
Radio broadcasts have different frequency ranges and change in different steps in different
countries.
This unit is factory preset to use in North and South America (local). To use the unit in
Japan or Europe, change the receivable frequency ranges and steps as below.
1 Press the RADIO ON/OFF/BAND MODE button to turn on the radio.
2 Hold down both +5 and UP buttons simultaneously for 3 seconds.
Each time they are held, the band setting is displayed cyclically as below.
US : North and South America (local)
JP : Japan
EU : Europe and other areas
• To return to the factory preset frequency range and step directly, hold down both
UP and DOWN buttons simultaneously for 3 seconds.
• When the frequency range and step are changed, the preset stations are erased.
MAINTENANCE → L
To clean the head and the tape path
After every 10 hours of use, clean the head and the tape path with a head cleaning
cassette or cotton swab moistened with cleaning fluid or denatured alcohol. (These
cleaning kits are commercially available.) When cleaning with a cotton swab a, wipe
the playback head b, the pinch rollers c and the capstans d.
To clean the cabinet
Use a soft cloth lightly moistened with a mild detergent solution. Do not use strong
solvents such as alcohol, benzine or thinner.
If erroneous operation or display occurs → M
Press the RESET button with a thin rod to reset the unit.
If the unit is reset, the stations that you preset are erased.
SPECIFICATIONS
Frequency range:
Reception area US
AM 530 – 1,710 kHz (10 kHz steps)
FM1, FM2 87.5 – 108.1 MHz (200 kHz steps)
Reception area JP
AM 531 – 1,629 kHz (9 kHz steps)
FM1, FM2 76 – 108 MHz (100 kHz steps in 76 – 90 MHz,
50 kHz steps in 90 – 108 MHz)
Reception area EU
AM 531 – 1,602 kHz (9 kHz steps)
FM1, FM2 87.5 – 108 MHz (50 kHz steps)
Maximum output
12 mW + 12 mW (EIAJ 32 ohms)
Power source:
DC 3 V using two size AA (R6) dry cell batteries
Battery life (EIAJ, 0.2 mW output, playback):
Approx. 7 hours using size AA (R6P) manganese batteries
disappears.
Publicidad
