Rexing V1P Gen3 Guia De Inicio Rapido página 9

Step 3: Power the Camera and Format the
Memory Card
Power the camera by connecting the charger to the
car cigarette lighter and camera. To ensure the V1P 3rd
Gen records to your memory card properly and without
error. Before you start using a new memory card, you
must format the card within the camera using the format
function. Always backup important data stored on the
memory card before formatting.
To format the memory card, make sure you have inserted your
memory card, then turn on the device by connecting to a power
source. Press REC to stop recording. Then press the
MENU button twice to enter the System Setup Menu.
Use the REC and MIC buttons and go to the Format
setting. Press the OK button to con irm the selection.
You may now disconnect from power. The camera will shut
down after
recording automatically the next time it is powered on.
3 seconds. The camera should begin
Press the Menu
button twice
Press the OK
button to confirm
formatting the
card
9