Publicidad
Idiomas disponibles
Idiomas disponibles
10. The Explain Of The Display Panel
The display panel is shown in Figure 10.1 .
operation timer
Operation
Timer
indicator
indicator
Table: Display panel output under normal operating conditions.
Unit state
Standby
Shutting-down
Normal operation
Operation
Cold draft prevention
or outdoor unit
defrosting operation
A timer has been set
11. Air Conditioner Operations and Performance
The operating temperature range under which the unit runs stably are
given in below table.
Mode
Cooling
If the indoor humidity is above 80%, condensation
may f orm on the surf aceof the unit.
Heating
Caution
•
The unit performs stably in the temperature range given in
above table. If the indoor temperature is outside the unit's
normal operating range, it may stop running and display an
error code.
eye
Digital LED
Infrared signal
display
receiver window
Figure 10.1
Unit state
Operation indicator
flashes slowly
All indicators off
Operation indicator
on
Operation and
Anti-cold / defrosting
indicators on
Timer indicator on
Indoor temperature
17-32°C
≤ 27°C
def./fan alarm
Anti-cold air /
defrosting indicator
Display output
Digital display panels
Digital display
Cooling and heating modes: set temperature
Fan only mode: indoor ambient temperature
Set temperature
To ensure the desired temperature is achievedefficiently, ensure that:
All windows and door are closed.
The airflow direction is adjusted to work in running mode.
The air filter is clean.
Please note how you can best save energy and achieve the best
cooling/heating effect.
Regularly clean air ffilters inside indoor units
15
ALARM
Check button
Check
regularly
Figure 11.1
V.1
V.2
Publicidad
