ClearSounds 40XLC Guia De Instalacion página 16

hole slots on the back of the phone. Slowly slide the phone down until it snaps into
place
(See figure #20)
6. Connect the handset coil cord (curly cord) to the handset and to the telephone.
7. Lift the handset and listen for a dial tone. If you hear a dial tone, your phone is ready
to use. If there is no dial tone, check all your cords to make sure they are plugged in
securely.
Figure #18 – Reversing The Hook
16
.
Figure #20 – Wall Installation
Figure #19 – Mounting The Wall Bracket