Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO
•
MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
•
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
•
and may require additional steps.
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
•
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
•
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
•
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
•
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
© 2016 Go Rhino Products. All rights reserved
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
PART NO.
920600T
•
PRODUCT DESCRIPTION:
Spoiler Sport Bar 4.0 Textured Black
•
P: 888 427 4466
1
Publicidad
Manuales relacionados para Go Rhino 920600T
Resumen de contenidos para Go Rhino 920600T
- Página 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 2 Installation of some of these products may alter the factory sensor system performance. • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified • vehicles. •...
- Página 3 DESCRIPTION SPOILER ¼ STAINLESS STEEL LOCK WASHER ¼ X ½ STAINLESS STEEL BOLT Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. TOOLS NEEDED FOR INSTALLATION: Allen wrench de 5/32”...
- Página 4 • Install the LED lights using the hardware provided by the LED light maker. You can use the different holes in the spoiler, look for the configuration that works the better for your lights. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 5 STEP # 4 • If possible, guide the cable through the tube of the sport bar and take it out through the hole in the main bracket REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 6 INSTALLATION INSTRUCTIONS STEP # 5 • Install the Spoiler to the front tube of the Sport Bar. Use (5) ¼ X ½ stainless steel bolts and (5) ¼ lock washers. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 7 This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.
- Página 8 Los fabricantes / distribuidores de este producto no garantizan que esta versión en particular estará disponible en una fecha posterior. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 9 Los sensores de fábrica pueden leer los ganchos que sobresalen del producto. • Todas las prueba de sensores se hace por Go Rhino Products y o por un laboratorio externo. • • La sensibilidad del sensor, las conexiones de los sensores, las condiciones de funcionamiento son todas las variables que influyen en la funcionalidad de los sensores.
- Página 10 SPOILER SPORT BAR 4.0 ITEM CANT. DESCRIPCION SPOILER ¼ RONDANA DE PRESION ¼ X ½ TORNILLO INOXIDABLE Go Rhino te recomienda leer y comprender todas las instrucciones antes de instalar. HERRAMIENTAS NECESARIAS: HERRAMIENTAS NECESARIAS: Llave de 5/32” • Taladro • Broca 3/8”...
- Página 11 • Instale las luces LED utilizando el hardware proporcionado por el fabricante de luces LED. Puedes usar los diferentes agujeros en el spoiler, busca la configuración que funcione mejor para tus luces. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 12 • Si es posible, pase el conector del arnés eléctrico a través del orificio ¾ en el tubo de la Sport Bar y las ventanillas del spoiler. PASO # 4 • Si es posible, guía el cable a través del tubo del Sport Bar y sácalo por el orificio del soporte principal. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 13 INSTRUCCIONES DE INSTALACION PASO # 5 • Instale el Spoiler en el tubo delantero del Sport Bar. Utilice (5) tornillos de acero inoxidable de ¼ X ½ y (5) rondanas de seguridad de ¼. REV.01...
- Página 14 En ningún caso Go Rhino será responsable ante el comprador o terceros por cualquier daño o perjuicio causado por el producto o el uso de los mismos, sin importar el tiempo en tales daños fueron previsibles y si Go Rhino ha sido advertido de la posibilidad de tales daños , no obstante el fracaso de cualquier remedio convenido u otro de su propósito esencial.