Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO
•
MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
•
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
•
and may require additional steps.
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
•
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
•
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
•
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
•
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
© 2016 Go Rhino Products. All rights reserved
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
PART NO.
• 911003T
• 911003PS
• 915003T
• 915003PS
PRODUCT DESCRIPTION:
• Sport Bar 3.0
P: 888 427 4466
1
Publicidad
Manuales relacionados para Go Rhino 915003T
Resumen de contenidos para Go Rhino 915003T
- Página 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 2 Installation of some of these products may alter the factory sensor system performance. • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified • vehicles. •...
- Página 3 3/8” NUT RIVET NUT INSTALL TOOL 3/8” RIVET NUT Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. You may also click here to view an installation video or visit http://www.gorhino.com/Installation-Videos.
- Página 4 • Attach each tube to the body using (2) ¼” metal spacers, (2) 3/8” flat washers, (2) 3/8” lock washers and (2) 3/8” hex bolts per side. • Do not fully tighten bolts, leave loose for final adjustments. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 5 • Remove sport bar and drill 13/32” holes through bed rails. • If holes can not be drill through top and bottom of bed rail proceed to step #4.1. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 6 • Hold spacer with ¾” wrench. • Thigten bolt with 9/16” wrench or socket and ratchet, this will compress the rivet nut. • Once tight, unscrew the bolt and river nut will be installed REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 7 • Place the sport bar over drilled mounting holes using the mounting base spacer as shown, both sides • Attach the sport bar using (2) 3/8” bolt plates, (2) 3/8” lock washers and (2)3/8” x 1 1/4” flat head bolts, per side REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 8 This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.
- Página 9 Los fabricantes / distribuidores de este producto no garantizan que esta versión en particular estará disponible en una fecha posterior. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 10 Los sensores de fábrica pueden leer los ganchos que sobresalen del producto. • Todas las prueba de sensores se hace por Go Rhino Products y o por un laboratorio externo. • • La sensibilidad del sensor, las conexiones de los sensores, las condiciones de funcionamiento son todas las variables que influyen en la funcionalidad de los sensores.
- Página 11 EMPAQUE FRONTAL INFERIOR EMPAQUE TRASERO INFERIOR EMPAQUE DE BASE TUERCA DE 3/8” HERRAMIENTA DE TUERCA INS. TUERCA INSERTO 3/8” Go Rhino te recomienda leer y comprender todas las instrucciones antes de instalar. HERRAMIENTAS NECESARIAS: • Llave de 5/32” • Taladro •...
- Página 12 3/8", (2) 3/8" rondanas de presión, separadores de metal de ¼"(2) y (2) tornillos hexagonales de 3/8" por lado. No apriete los tornillos, deje sueltos para los ajustes finales. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 13 Sportbar, asegurándose de que la parte inferior del borde de la cama este libre de cualquier obstrucción. Quite el Sportbar y perfore agujeros 13/32" a través del borde de la cama. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 14 • Inserte la tuerca remachable en el barreno de 17/32” • Apriete el tornillo con una llave de 9/16”, esto comprimirá la tuerca remachable. • Una vez apretada, afloje el tornillo y la tuerca quedara instalada. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 15 • Instale el Sportbar usando (2) soleras roscadas3/8“, (2) rondanas de presión de • 3/8” y (2) tornillos de cabeza plana 3/8" x 1 1/4", por cada lado. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 16 En ningún caso Go Rhino será responsable ante el comprador o terceros por cualquier daño o perjuicio causado por el producto o el uso de los mismos, sin importar el tiempo en tales daños fueron previsibles y si Go Rhino ha sido advertido de la posibilidad de tales daños , no obstante el fracaso de cualquier remedio convenido u otro de su propósito esencial.