Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO
•
MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
•
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
•
and may require additional steps.
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
•
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
•
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
•
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
•
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
© 2016 Go Rhino Products. All rights reserved
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
PART NO.
920000T / 920000PS
•
PRODUCT DESCRIPTION:
Sport Bar 4.0 Textured Black (International
•
Vehicle)
Sport Bar 4.0 Polished Stainless Steel
•
(International Vehicle)
P: 888 427 4466
1
Publicidad
Manuales relacionados para Go Rhino 920000T
Resumen de contenidos para Go Rhino 920000T
- Página 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 2 Installation of some of these products may alter the factory sensor system performance. • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified • vehicles. •...
- Página 3 INNER LEFT PLASTIC COVER OUTER LEFT PLASTIC COVER INNER RIGHT PLASTIC COVER OUTER LEFT PLASTIC COVER Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. TOOLS NEEDED FOR INSTALLATION: Allen wrench de 5/32”...
- Página 4 • Attach the inner left body using (2) ¼ ” galvanized lock washers and (2) ¼ “ galvanized bolts per side. Do not fully tighten the bolts, leave loose for final adjustments REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 5 • Assemble the rear left tube (E) with the inner left body (C) as shown. Make sure you assemble left with left. • Attach the inner right body using (1) M8 x 30 SEMS bolt. Do not fully tighten the bolt, leave loose for final adjustments REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 6 • Do not install the cover plates (J) if a bed cover is going to be used. • Do not fully tighten bolts, leave loose for final adjustment. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 7 • Install the Outer right plastic cover (T) on the tubes. Attach the cover using (3) ¼ Stainless Steel bolt and (3) ¼ Stainless Steel lock washer. Repeat the operation with the other cover (R) on the other side of the Sport bar. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 8 STEP # 10 • Place the sport bar over drilled mounting holes Attach the sport bar using (2) M8 x 30 SEMS bolts (P) and (2) M8 bolt plates (K), per side. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 9 This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.
- Página 10 Los fabricantes / distribuidores de este producto no garantizan que esta versión en particular estará disponible en una fecha posterior. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 11 Los sensores de fábrica pueden leer los ganchos que sobresalen del producto. • Todas las prueba de sensores se hace por Go Rhino Products y o por un laboratorio externo. • • La sensibilidad del sensor, las conexiones de los sensores, las condiciones de funcionamiento son todas las variables que influyen en la funcionalidad de los sensores.
- Página 12 M8 X 30 TORNILLOS SEMS CUBIERTA INTERNA IZQUIERDA CUBIERTA EXTERNA IZQUIERDA CUBIERTA INTERNA DERECHA CUBIERTA EXTERNA DERECHA Go Rhino te recomienda leer y comprender todas las instrucciones antes de instalar. HERRAMIENTAS NECESARIAS: HERRAMIENTAS NECESARIAS: Llave de 5/32” • Taladro •...
- Página 13 • Fije el cuerpo izquierdo interno usando (2) Rondanas de seguridad galvanizadas de ¼ ”y (2) tornillos galvanizados de ¼” por lado. No apriete completamente los tornillos, déjelos sueltos para los ajustes finales. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 14 • Ensamble el tubo trasero izquierdo (E) con el cuerpo interior izquierdo (C) como se muestra. Asegúrese de ensamblar izquierdo con izquierdo. • Fije el cuerpo interior izquierdo con (1) tornillo M8 x 30 SEMS. No apriete completamente el tornillo, déjelo suelto para los ajustes finales. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 15 SEMS M8 x 30 por soporte. Asegúrese de ensamblar derecha con derecha e izquierda con izquierda. No apriete completamente el tornillo, déjelo suelto para los ajustes finales. • No instale las cubiertas (J) si se va a utilizar una tapa de caja. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 16 • Instale la cubierta de plástico exterior derecha (T) en los tubos. Fije la cubierta usando (3) tornillos de ¼ de acero inoxidable y (3) ¼ rondanas de seguridad de acero inoxidable. Repita la operación con la otra tapa (R) en el otro lado del Sport Bar. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 17 PASO # 10 • Coloque el Sport Bar sobre los orificios de montaje perforados. Fijelo con (2) tornillos M8 x 30 SEMS (P) y (2) placas roscadas M8 (K), por lado. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 18 En ningún caso Go Rhino será responsable ante el comprador o terceros por cualquier daño o perjuicio causado por el producto o el uso de los mismos, sin importar el tiempo en tales daños fueron previsibles y si Go Rhino ha sido advertido de la posibilidad de tales daños , no obstante el fracaso de cualquier remedio convenido u otro de su propósito esencial.