Danby Designer DBC039A1BDB Manual Del Propietário página 7

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging in to
avoid damage to internal components.
1. Remove the screw covers and the screws
securing the hinge cover. Remove the hinge
cover.
2. Remove the screws securing the upper hinge and
remove the upper hinge. Remove the door from
the cabinet. Remove the screw hole covers from
the left side of the cabinet and install them in
the screw holes on the right side of the cabinet.
Remove the hinge hole cover from the left side
of the door and install it in the hinge hole on the
right side of the door.
3. Remove the solid foot and the lower hinge.
Install the solid foot on the right side of the
cabinet and the lower hinge on the left side of
the cabinet.
4. Install the door on the cabinet. Install the upper
hinge on the left side of the cabinet. Before
tightening the screws on the upper hinge, ensure
that the door is level with the cabinet and that
the rubber gasket is making a good seal with the
cabinet all the way around.
1. Screw Cover
2. Screw
3. Hinge Cover
4. Upper Hinge
5. Hinge Hole
6. Solid Foot
7. Lower Hinge
1
2
3
4
6
1
2
3
2
4
5
7
2
6