HoMedics BPA-101 Manual De Instrucciones página 11

Idiomas disponibles

1. Press the User Select Button to choose User 1

or User 2.

START

STOP

After the user number is selected, press the

START/STOP button to confirm the chosen user.

2. With the cuff wrapped around your arm, press the

START/STOP button. Do not inflate the cuff unless it

is wrapped around your arm. All digits will light up to

check the display functions. The checking procedure

will be completed after about 2 seconds.

START

STOP

3. After all symbols disappear, the display will show a

blinking "0". The monitor is "Ready to Measure"

and will automatically inflate the cuff to start

measurement.

4. Once your systolic pressure is determined, the monitor

will begin deflating to measure your diastolic pressure.

Note: This monitor will re-inflate automatically if the system detects

that your body requires more pressure for measurement.

5. When the measurement is completed, the cuff

will deflate. Systolic pressure, diastolic pressure

and pulse will be shown simultaneously on the

LCD screen. The measurement

is then automatically stored

into memory.