Publicidad
3.
Press and hold the on/off (C) button to switch on.
To use the Hydracare function see Using the Hydracare Function below.
•
4.
Select the appropriate temperature for your hair type using the +/- controls on the side of the
product. Start styling at on lower temperatures first.
5.
The '+' button will increase the temperature and the '-' button will decrease the temperature.
Recommended temperatures when the Hydracare function is turned off
Temperature
150°C - 170°C
170°C - 190°C
210°C - 230°C
•
Caution: the hottest temperatures should only be used by experienced stylers
6.
The temperature on the digital display will stop flashing when the product is ready to use.
7.
Working on one section at a time, run the straightener through the entire length of the hair without
stopping.
8.
After use, press and hold the on/off (C) button for two seconds to turn off then unplug the appliance.
Using the Hydracare Function
•
Before operating the Hydracare function, the reservoir must be filled with water.
1.
Press and hold the Hydracare on/off switch ( ) for 2 seconds to activate.
2.
The Hydracare icon ( ) will illuminate during styling.
•
The recommended optimum temperature of 170°C is automatically selected. If required this can be
overridden using the +/- controls on the side of the product.
3.
The temperature on the digital display will stop flashing when the product is ready to use.
•
IMPORTANT: In use, always ensure the Hydracare moisture mist outlet is facing downwards towards
the end of the hair (fig. D). If the outlet is facing upwards towards the roots of your hair, your hair will
be left damp and the performance of the straightener will be restricted.
4.
When the plates are closed onto the hair, moisture in the form of a light mist is emitted from the
outlet.
5.
Working on one section at a time run the straightener through the entire length of the hair without
stopping.
Temperature Boost Function
•
For quick touch ups of stubborn, hard to style sections.
•
The temperature boost function boosts the temperature to 230°C.
•
Hold the '+' button for 2 seconds to operate.
•
Caution: The highest temperature is not suitable for every hair type. If you plan to use this
straightener on the boost setting of 230°C please test on a small section of your hair first.
Temperature Lock Function
•
Set the desired temperature by pressing +/- buttons and lock the
temperature controls by pressing the '-' button for 2 seconds. A Lsymbol will appear next to the
temperature.
•
To unlock the temperature controls, press and hold the '-' button again for 2 second.
Hair type
Thin / fine, damaged or bleached hair
Normal, healthy hair
Thick, very curly and difficult to style hair
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE
5
Publicidad
