Descargar Imprimir esta página

Diamond AP1B/F86-R2 Manual De Servicio página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
3.
SETTING PARAMETERS (PJEZ VERSION)
GB
The operating parameters, modifiable using the keypad, are divided into two types: frequent (type F) and
configuration (type C). Access to the latter is protected by password (default= 22) to prevent accidental or
unauthorised modifications.
Accessing the type F parameters:
Press the
there are active alarms, mute the buzzer). The
display shows the parameter code 'PS'
(password);
use the
parameters. The LED corresponding to the
category of parameters will be on (see Table).
press
with the parameter;
Accessing the type C parameters:
Press the
there are active alarms, mute the buzzer), the
display shows the parameter code "PS"
(password);
press the
setting;
use the
numbers until displaying "22" (password to
access the parameters);
press the
password;
use the
parameters. The LED corresponding to the
category of parameters will be on (see Table)
Warnings :
if no button is pressed for 60 s, all the changes made to the parameters, temporarily saved in the RAM, will
be cancelled and the previous settings restored.
button for more than 3 s (if
and
buttons to scroll the
to display the value associated
button for more than 3 s (if
button to access the password
and
buttons to scroll the
button to confi rm the
and
buttons to scroll the
increase or decrease the value using the
and
button respectively;
press
to temporarily save the new value
and display the parameter again;
repeat the procedure for any other parameters
that need to be modified;
press the
button for more than 3 s to
permanently save the parameters and exit the
parameter setting procedure.
press
to display the value associated
with the parameter;
increase or decrease the value using the
and
button respectively;
press
to temporarily save the new value
and display the parameter again;
repeat the procedure for any other parameters
that need to be modified;
press the
button for more than 3 s to
permanently save the parameters and exit the
parameter setting procedure.
2

Publicidad

loading