Descargar Imprimir esta página

DuPont WFPF3800 Instrucciones De Instalación página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

IM WFCH2 V40 P :WFCH1_inst 8/13/09 1:47 PM Page 17
Optional Installment Method: Direct connect to Kitchen Faucet
NOTE: Undersink filters reduce water flow. If you wish to maintain unfiltered water flow for dishwashing, etc., we recommend
installing separate Faucet for Filtered Water (DuPont WFFT100 Series).
STEP 1
-Optional Direct Connect
Turn Off the Main Water Supply Line
1
Locate the cold water shut-off valve under the sink. Turn off the cold water supply to the existing kitchen sink.
NOTE: If uncertain about which line supplies the cold water, turn on the hot water to the faucet. llow the water to heat up and carefully
feel the pipes under the sink. The pipe that remains cool to the touch is the cold water supply.
2
Turn on the cold water faucet on the kitchen sink to release pressure and allow water to completely drain from the line.
STEP 2
-Optional Direct Connect
Install the Kitchen Faucet dapter
NOTE: The Kitchen Faucet dapter is designed to fit 1/2" NPTF supply threads.
1
Locate the cold water shut-off valve under the sink. Turn off the cold water supply to the sink.
NOTE: If uncertain about which line supplies the cold water, turn on the hot water to the faucet. llow the water to heat up and carefully
feel the pipes under the sink. The pipe that remains cool to the touch is the cold water supply.
2
Turn on the kitchen faucet to release pressure and allow water to completely drain from the line.
3
Disconnect the cold water line from the 1/2" threaded stem on the bottom of the kitchen faucet.
NOTE: If rigid plumbing pipe (metal or plastic) is used, you may need to shorten the pipe using a hacksaw to accommodate the
Kitchen Faucet dapter.
4
Holding the Kitchen Faucet dapter
Screw the cold water supply line to the male threads of the Kitchen Faucet dapter using the nut that was connecting the cold
water line to the kitchen faucet previously. For a secure fit, tighten the nut using an adjustable wrench.
6
If you have replaced your sprayer with the Faucet for Filtered Water be sure to cap off the sprayer outlet from the faucet. Most
kitchen faucets will require a compression cap to seal to prevent leaks.
WFCH2 Series
H
in an upright position (see diagram), screw onto the threaded faucet stem.
1
2
16
COLD W TER
V LVE
KITCHEN F UCET
2
4
H
3
1
HOT W TER
COLD W TER
V LVE
V LVE
X
X
RIGID PIPE INST LL TION
V4.0

Publicidad

loading

Este manual también es adecuado para:

Wfch2 serieWfqt13000