Publicidad
Idiomas disponibles
Idiomas disponibles
GB
To set the stamp wheels Fig.
Press the handle
travel and keep holding it.
Press and hold button
Allow the handle
the handle locks in place.
You will be able to move the stamp wheels
freely with the stylus
In order to return to the print position,
simply push down on handle
You can easily place the date one day further
ahead! (Not valid for the stamp Model H67b.)
Press the switch button
To insert the inkpad Fig.
Note: Use only oil-containing stamp ink.
Handle with caution to avoid dirt from ink!
Press the handle
travel and keep holding it.
Press the button
continue to hold it.
Allow the handle
the handle locks in place.
Unpack the inkpad carefully.
Squeeze the grips
inkpad and hold them.
Insert the ink pad inside the pad cradle.
Slide the pad into the slot
In order to return to the print position,
simply push down on handle
1
+
2
+
to the bottom of its
on the front plate
to move upwards until
.
.
once.
1
4
+
to the bottom of its
on the front plate and
to move upwards until
on the back of the
of the stamp.
.
3
To change the numbering actions Fig.
Actions
0
The same number is stamped every time.
1
Number increases after each stamping
process.
2
Number increases after every 2
stamping process.
etc.
Press the switch lever
desired action.
To park the stamp Fig.
To prolong the life of the inkpad,
park the stamp!
Press and hold button
Gently push handle
stamp clicks & locks in a raised position.
In order to return to the print position,
simply push down on handle
GB
nd
and slide it to the
5
on the front plate.
downwards until the
.
3
Publicidad
