3
Open the rear of the case to remove the digital camera.
After thoroughly wiping your hands, apply your finger as shown
in the illustration and take out the digital camera.
4
Remove the O-ring from the Case and check that there is
no dirt etc. in the O-ring groove.
5
Check that there are no scratches etc. on the O-ring while
you are applying the grease.
Notes
Be careful of the following points when taking out the digital camera.
•
Remove the camera with clean hands. (Wash your hands with fresh water and then
thoroughly dry them.)
•
Thoroughly dry any moisture on your body or hair. (Be particularly careful about
any water coming from the sleeves of your thermal suit.)
19
(ENG) VQT4V83