Sharp SJ-SE099M0X-EU Manual De Uso página 8

CHAPTER -1: GENERAL WARNINGS
Before using your freezer
• Before setting up your freezer, check for any visible damage. Do not install or use your freezer if it is
damaged.
• When using your freezer for the first time, keep it in an upright position for at least 3 hours before plugging
into the mains. This will allow efficient operation and prevents damage to the compressor.
• You may notice a light odour when using your freezer for the first time. This is perfectly normal and will fade
away as the freezer starts to cool.
CHAPTER -2: YOUR FREEZER
Freezer thermostat dial
Freezer bottom drawer
Plastic ice blade
Ice tray
This figure has been drawn for information purposes to show the various parts and accessories in the appliance.
Parts may vary according to the model of the appliance.
General notes:
Freezer Compartment (Freezer): Most Efficient use of energy is ensured in the configuration with the drawers and
bins are on stock position.
CHAPTER -3: USING YOUR FREEZER
Freezer control
Freezer thermostat automatically regulates the inside temperature of the compartments.
By rotating the knob from position "1" to "5", colder temperatures can be obtained.
Important note: Do not try to rotate knob beyond 1 position it will stop your appliance.
Freezer thermostat setting;
1 – 2 : For short-term storage of food in the freezer compartment, you can set the knob between minimum and
medium position.
3 – 4 : For long-term storage of food in the freezer compartment, you can set knob medium position.
5 : For freezing the fresh food. The appliance will run for colder temperatures.
Note that; the ambient temperature, temperature of the freshly stored food and how often the door is opened, affects
the temperature in the freezer compartment. If required, change the temperature setting.
Freezer room flap
Freezer drawers
EN -6-