7. Place propane gas tank (not included) into the
metal stand (J). Make sure the gas tank sits on the
metal stand (J) completely. Turn the preassembled
wing screw on the outer part of metal stand (J)
clockwise to secure the propane gas tank tightly.
8. Turn the cylinder valve on the tank clockwise to
close the propane tank. Attach the preassembled
regulator from the table top (B) to the cylinder valve
by turning the regulator coupling nut clockwise.
Make sure it is fastened securely and tighten
connections by hand only.
9
. Pour the box of lava rocks (K) into the firebowl (G).
CAUTION
To ensure proper function, the guard (N) on this
burner (H) should be free of lava rocks at all times.
Keep away from the unit and allow the unit to burn
Always ensure that lava rocks/pumice stones/
LavaGlass
are completely dry before use. Failure
®
to do so will cause them to crack or pop.
J
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
G
K
1-866-771-2663 | Page 9
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
N
H