Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature
Press the TEMP/TIME up arrow button to raise the
■
temperature. Each time you press or hold the TEMP/TIME up
arrow button, the temperature will go up 1ºF until it reaches
86°F (30°C).
NOTE: After 5 seconds, the display will show the current room
temperature.
Press the TEMP/TIME down arrow button to lower the
■
temperature. Each time you press or hold the TEMP/TIME
down arrow button, the temperature will go down 1ºF until it
reaches 61°F (16°C).
NOTE: After 5 seconds, the display will show the current room
temperature.
Timer Delay
To set the Timer for a 1-hour to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1.
Press TIMER. Timer On indicator light will flash. Display will
show remaining hours before the air conditioner will turn off.
2.
Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
3.
After 5 seconds, Timer On indicator light will remain on.
Display will show the current room temperature.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1.
Turn on the air conditioner.
2.
Press TIMER. Timer On indicator light will flash. Display will
show remaining hours before the air conditioner will turn on.
3.
Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
4.
After 5 seconds, Timer On indicator light will remain on.
Display will show the current room temperature.
10
To set the Timer to turn on the air conditioner, changing
the previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Cool, Energy Saver or Dehum.
3. For Fan, Cool or Energy Saver mode, adjust the fan speed to
High, Med or Low.
NOTE: In Dehum mode, the Speed button will not operate.
4. Adjust the temperature between 61ºF and 86ºF (16ºC and
30ºC).
NOTE: In Fan mode, the temperature cannot be set.
5. Wait 3 seconds before turning off the air conditioner.
6. Press TIMER. Timer On indicator light will flash. Display will
show remaining hours before the air conditioner will turn on.
7. Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
8. After 5 seconds, Timer On indicator light will remain on. Dis-
play will show the current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. While the display is showing the remaining time, press TIMER
again. Timer Off indicator light will turn on.
To see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. While the display is showing the remaining time, press the up
or down TEMP/TIME button to increase or decrease the time.
3. After 5 seconds, the display will show the current room
temperature.
Publicidad
