Bosch GSM 175 Instrucciones De Servicio página 8

EURO • Printed in Germany • BA 1 609 929 488 • GSM 175/200 D • GB
1 609 929 488 - Buch Seite 1 Donnerstag, 15. August 2002 9:24 09
Tool Specifications
Double Bench Grinder
Order number
Rated power consumption
Output power
No-load speed
Grinder spindle thread
Grinding Wheels
Ø x width
Mounting hole Ø
Abrasive
Weight (without
grinding wheels), approx.
Protection class
Please observe the order number of your machine. The trade names of the individual machines may vary.
Noise Information
Measured values determined according to
EN 61 029.
Typically the A-weighted sound pressure level of
the product is 72 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
Intended Use
The machine is intended for sharpening of tools
as well as for grinding and deburring metal.
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served. Before using for the first
time, ask for a practical demon-
stration.
Wear safety goggles. When neces-
sary, also wear an apron. For long
hair, wear hair protection. Work
only with closely fitting clothes.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
9 • 1 609 929 488 • 02.08
GSM 175
0 601 277 0..
[W] 500
[W] 360
[rpm] 2 840
M 10
[mm] 175 x 25
[mm] 32
36/60
[kg] 14.3
/ I
The machine may be connected only to properly
earthed mains. The socket and extension cable
must have a functional protective conductor.
The machine must be operated only with the
appertaining protective devices.
GSM 200 D: Connect the machine only to
sockets with protective contacts. The machine
may be connected to the mains supply only by
a qualified electrician.
Use only grinding wheels with an allowable
speed that is at least twice as high as the
no-load speed of the machine.
Check the grinding wheels before use. The grind-
ing wheels must be mounted properly and be
able to rotate freely. Carry out a test run without
load for at least 5 minutes. Do not use damaged,
out-of-round or vibrating grinding wheels.
Do not work with materials containing asbes-
tos.
Regularly check the clearances between
tool rest 11 and wheel guard 8 to the grind-
ing wheel and readjust, if required. The
clearances to the grinding wheel must not
exceed 2 mm.
For grinding, lower the spark guard 9 as far as
possible.
Apply the workpiece/tool only to the rotating
grinding wheel.
Never apply workpiece/tool sidewards against
the rotating grinding wheel, but grind only from
the front.
Never reach into the rotating grinding wheel.
Do not brake the grinding wheel by applying
sideward pressure to it.
When grinding metal, flying sparks are pro-
duced. Take care that no persons are endan-
gered. Due to danger of fire, no combustible
materials should be located in the vicinity
(spark flight zone).
English - 1
GSM 200 GSM 200 D
0 601 277 1.. 0 601 277 2..
700 550/3-Phase
500 400
2 800 2 840
M 10 M 10
200 x 25 200 x 25
32 32
36/60 36/60
16.2 15.6
/ I / I