Descargar Imprimir esta página

Hinkley 56 IVER Manual De Instalación página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

BLADE ATTACHMENT
10
| hinkley.com
Blades
Blade support plates
Screws
Insert the blade through the slot on the housing. Align the holes
on the blade and the fan motor assembly and secure with the
blade support plates and blade attachment screws.
NOTE:
Cordless power screwdrivers are NOT recommended,
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws. Use a large flat blade screwdriver
for final tightening to fully compress the washers. This
will help ensure proper alignment of the blades and
noise-free, wobble-free running.

Publicidad

loading