Hinkley 56 IVER Manual De Instalación página 13

INSTALLING THE LED ASSEMBLY
NOTE: Be sure the power is off before installing.
While holding the LED assembly under your fan, make the
1
polarized plug connections: (Fig. 1)
- White to white
- Black to black
Position the notches on the inner edge of the LED light kit so
2
they match the tabs on the outside of the rim on the light kit
mounting plate. Carefully lift the LED light kit inside the light
kit mounting plate and secure it to the fan by turning the LED
light kit clockwise until snug. (Fig. 1)
3
Restore power and your LED assembly is ready for operation.
NOTE: The decorative cover included with your fan is an option
to replace the led assembly for the light in the event that you
prefer not to use the light feature of your fan. The decorative
cover is not necessary for the light operation; it can be saved for
later use if desired. (Fig. 2)
Wire connectors
LED
assembly
Fig. 1
Decorative
cover
Fig. 2
©2023 Hinkley Lighting, Inc.
| hinkley.com | 11