PNI Hunting 250C Manual De Instrucciones página 6

Camera configuration using UCon app
1. Download the UCon
application from Google Pay
or the App Store or scan the
attached QR code:
2. Open the application, register and log in.
3. In the main interface of the application, click on "Add a device",
then click on the option "Setup 4G Device" and on "Next".
Note: to configure the camera, you can also follow the voice
prompts in the application.
4. Scan the QR code on the label stuck on the camera.
5. After connecting the camera, choose a name and a location.
6. You will receive the message "Camera installed successfully.
Fully charge the camera at first use".
7. If the status of the camera is Online, click on the camera to live
view the images taken by it.
User manual - 6