Publicidad
Idiomas disponibles
Idiomas disponibles
FUELING
Fuel & its vapors are very flammable. Do not use or fuel the machine near a flame, sparks or while smoking.
Allow the engine to cool for more than 3 minutes, before re-fueling. Never fuel the machine with the engine
running. Fuel the engine at least 3 metres away from your work area. Always fuel your machine outdoors.
•
Only use 2-stroke air cooled engine oil. DO NOT USE automotive or marine oil.
•
It is recommended that you use a Fuel Mixing Bottle, to ensure the correct fuel mixture is used with your
machine.
•
The machine has been designed to use unleaded petrol mixed with 2-stroke air cooled engine oil. Check
the oil manufacturers guidelines to determine the correct ratio. The fuel mixture should be shaken prior to
entering the machine fuel tank. The tables below indicated the mixtures required.
50:1 Fuel:Oil Mixture Ratio
Unleaded Petrol
(Litre)
1
2
3
4
5
•
Unscrew the fuel cap slowly and fill the fuel tank with your fuel mixture to a maximum of 80% capacity.
This will allow the fuel tank expansion.
•
Fasten the fuel cap tightly, being careful not to cross-thread. This will also prevent loosening through
vibration during use.
•
Wipe away any spillage, with an appropriate material.
•
If the machine has continued leaks, the product should not be started. Never use the machine with
damaged ignition cable or spark plug cap, as there is a risk of sparks.
•
Use good quality unleaded fuel.
•
Fuel which is older than 30 days old can become stale and cause acid & gum deposits in the fuel system or
essential carburetor components. This could result in starting issues which would not be covered by your
manufacturer's warranty.
To keep fuel fresh, we recommend you use FUEL ADDITIVE.
❖ Helps make machines easier to start
❖ Extends shelf life of petrol up to 2 years
❖ Keeps carburettor & engine clean
❖ Reduces emissions & increases fuel economy
IMPORTANT
✓ Ensure that any stored petrol/oil mixture is clearly marked in a separate appropriate canister for a
maximum of 4-6 weeks.
✓ If the machine is not going to be used for a long period, drain the mixture from the fuel tank, start the
engine and drain the carburetor of any remaining fuel. (See Maintenance for further instruction), dispose
of any unwanted 2-stroke mixture at an authorised recycling point.
2-Stroke Mineral Oil
(ml)
20
40
60
80
100
25:1 Fuel:Oil Mixture Ratio
2-Stroke Synthetic or
Unleaded Petrol
Semi Synthetic Oil
(Litre)
1
2
3
4
5
(ml)
40
80
120
160
200
Publicidad
