Publicidad
Idiomas disponibles
Idiomas disponibles
TINE / WHEEL BRACKET DEPTH ADJUSTMENT
•
If the tines are digging too deep or not enough, adjust following the below guidelines:
•
Tine adjustment will vary depending on the type of soil being cultivated and how it will be used.
•
Stop the engine and loosen the two handlebar knobs on the tine guard.
•
Slide the wheel bracket assembly down for shallower digging and up for deeper.
•
Tighten the wing nuts again, making sure that the carriage bolts are properly seated through the bracket.
•
To transport, slide the wheel bracket assembly all the way down, tilt the unit back so that the
tines clear the ground and push to the next location using the wheels.
The tines are marked A for right and B for left. The difference is the rotation direction of blade.
You can assembly the blades in two ways.
B
A
B
A
B
A
B
A
Publicidad
