Urmet DS1092-183 Manual De Instrucciones página 26

DAY/NIGHT – CAMERA OPERATION CHANGE ACCORDING TO VARIATION OF LIGHT PRESENT IN
The camera usually captures color images, but under poor light conditions it automatically switches its
operation mode from "color" to "black/white". In this way the captured image quality is optimized. Selecting
DAY/NIGHT, you can choose from the options EXT, AUTO (automatic), COLOR and B/W (black and
white).
EXT – (Default: Option highly recommended)
This option selects the automatic mode switching COLOR / BLACK&WHITE and the time in seconds of the
transition. The switching in black and white and the activation of the infrared lighting is synchronized by the
CDS.
D N (DELAY)
N D (DELAY)
RETURN
COLOR
With this option camera images are always in color mode and the camera does not switch in Night mode
(B/W). During the night or under conditions of poor illumination, with the IR illumination, images are in black
and white anyway.
B/W
With this option, camera images are always in black/white mode. Select B/W option to access the following
submenu:
BURST
IR SMART
IR PWM
RETURN
Option
BURST
IR SMART
IR PWM
This function enables a filter to reduce the image noise. Options available: OFF (to unable the function),
LOW, MIDDLE e HIGH.
26
THE SCENE
D&N EXT
■■■■■■█■■■40
■■■■■■█■■■40
RET
D&N B&W
OFF
OFF
■■■■█■■■■■40
RET
Value
If set to ON, the colour burst is present even if the camera
ON÷ OFF
is in black/white mode.
The IR SMART function must be used with the EXT and
B/W options and allows you to select a taken scene area
which the camera adjusts the brightness automatically in.
ON÷ OFF
If ON, the camera adjusts the brightness on the selected
area in its submenus (LEVEL and AREA).
Function not available on this product
1 ÷ 100
Description
NR
DS1092-183