Urmet DS1092-183 Manual De Instrucciones página 31

SHARPNESS
Whit this function it's possible to adjust the SHARPNESS through the level setting (from 0 to 10) and the
AGC function (Automatic gain control which operates when the camera shoot images under poor
illumination conditions).
MONITOR
This option allows to obtain the best performance of the camera according to the monitor used to see
images. It can be LCD or CRT monitor.
Setting available for LCD monitor:
Option
BLACK LEVEL
GAMMA
BLUE GAIN
RED GAIN
Setting available for CRT monitor:
Option
BLACK LEVEL
BLUE GAIN
RED GAIN
LSC (Lens Shading Compensation)
Image improvement of the dark corner zones. This function performs an adjustment of the shading level on
image corners. To set the right level, point the camera to a completely white wall and press the Menu
button (ENTER)
VIDEO OUT
Video standard option: PAL or NTSC
MONITOR OUT (only with CVBS video output)
Display mode option: 16:9 o 4:3
COMET (only with CVBS video output)
The COMET (Composite Video Enhanced Technology) video mode enables.
Important note:
This must be used with the CVBS video output and any devices compatible with COMET video signal
DS 1092-183
Value
The value is already set up to a normal LCD operation.
Change the value only in specific video take conditions or
0 ÷ 60
for using monitors that do not meet standards.
Setting the Gamma value
USER ÷ 1.00
Increase or reduce the saturation value to change the
0 ÷ 255
color gain.
Increase or reduce the saturation value to change the
0 ÷ 255
color gain.
Value
The value is already set up to a normal CRT operation.
Change the value only in specific video take conditions or
0 ÷ 60
for using monitors that do not meet standards.
Increase or reduce the saturation value to change the
0 ÷ 255
color gain.
Increase or reduce the saturation value to change the
0 ÷ 255
color gain.
Description
Description
31