Descargar Imprimir esta página

Genesis GLCD20CSE Manual Del Operario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

SPECIFIC SAFETY rULES FOr COrDLESS DrILLS
WArNING:
(GAINED FrOM rEPEATED USE) rEPLACE STrICT ADHErENCE TO PrODUCT SAFETY
rULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
WArNING:
operation where cutting tools may contact hidden wiring or its own cord. Contact with a
"live" wire will make exposed metal parts of the tool "live" and shock the operator!
Do not leave the tool running.
Be Aware that this tool is always in an operating conditio
have to be plugged into an electric outlet.
When operating the tool from an elevated position
beneath you.
Always hold the tool firmly in your hands before switching the tool "ON"
reaction to the torque of the motor as it accelerates to full speed may cause the tool to twist.
Wear eye and hearing protection.
otherwise specified, everyday glasses provide only limited impact resistance, they are not safety glasses.
use only certified safety equipment; eye protection equipment should comply with ANSI z87.1 standards.
Protective hearing equipment should comply with ANSI s3.19 standards.
Protect your lungs
the risk of personal injury.
Always disconnect battery pack from tool
before any assembly, adjustments or changing of accessories. following this instruction will reduce the risk
of serious personal injury.
Do not place battery tools or their batteries near fire or heat.
risk of explosion and possibly personal injury.
Never use a battery which has been dropped or received a sharp blow.
damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
Use designated battery pack (Genesis™ - Model GLAB20C) and charger for
this tool.
IMPOrTANT SAFETY INSTrUCTIONS FOr CHArGEr &
BATTErY
Save these Instructions.
battery charger.
Before using the battery charger,
Charger, (2) Battery, and (3) Product using battery.
Use only the charger
manual. Do not substitute any other charger.
Do not recharge the battery in damp or wet environments
battery pack to water or rain.
Do not operate the charger with damaged cord or plug
Do not operate the charger if it has received a sharp blow,
otherwise damaged in any way. Take it to a qualified serviceman.
Do not disassemble the charger or battery pack.
service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
6
DO NOT LET COMFOrT Or FAMILIArITY WITH PrODUCT
Hold tool by insulated gripping surfaces when performing an
. Wear a face or dust mask if the operation is dusty. following this rule will reduce
use of any other batteries may result in a risk of fire.
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for your
which accompanied your product or direct replacements as listed in this
20V Lithium-ion Drill/Driver
Operator's Manual
operate the tool only when hand-held.
Always use safety glasses with side shields. unless
or place the switch in the locked or off position
read all instructions and cautionary markings on (1) Battery
n, because it does not
, be aware of people or things
This will reduce the
. Do not expose the
. Replace it immediately.
been dropped or
Take it to a qualified serviceman when
GLCD20CSE
. The
A

Publicidad

loading