Qlima D 620 Instrucciones De Uso página 36

Ocultar thumbs Ver también para D 620:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
OPERATION OF KEY PADS
1 W hen the unit is plugged into a power socket, 2 beep signals can be heard. The
display will remain blank until the On/Off power button is pressed.
2 Press " MODE" to set humidistat (Dehu) or dry mode (Dry)
(1) In Dry mode the Dry symbol appears along with CO (continuous) on
the display. The fan speed will increase to the highest fourth fan speed
(only available in Laundry Mode). Having this higher fan speed is key to
drying things faster. We recommend also activating the swing louvre
mode to help move the air across the item to be dried.
(2) When selected "Dehu" mode. You can press the SET to select a target relative
humidity (40%~50%~60%~70%~CO). There is also the option of CO which stands for
continuous and means that the machine will not stop at a particular relative humidity
but will continue to dry regardless of the room relative humidity.
3 CHILD LOCK
Press the button of "LOCK" for 3 second to activate lock function then fall
function keys are locked. To release this feature. Press LOCK key again 3
seconds.
4 Press the "SET" to set desired humidity 40%~50%~60%~70%~CO.
Recommend to set humidity value in 50%. For example, when the appliance
detects that the current environment humidity is higher than or equal to 55%RH,
the appliance start and fan runs at high speed; when the appliance detects that
the current environment humidity is less than or equal to 49%RH, compressor
stop and fan runs at low speed, the power indicator light will illuminate.
5 SWING: Press the button to switch on/off swing performance.
Press "SWING" to turn the air outlet louver move or stop.
6 SPEED
Press "SPEED" to select the fan working at "High speed" or "Low speed".
7 TIMER (On or Off)
The appliance must be connected to the mains socket outlet and power
provided to the appliance.
With the appliance switched OFF at the control panel (the display and all LEDs will be
OFF), press the TIMER button repeatedly to select the number of hours (1H/2H/4H/8H)
that will pass before the appliance switches ON.
To switch OFF the appliance:
With the appliance switched ON at a the control panel, press the TIMER button
repeatedly to select the number of hours (1H/2H/4H/8H) that will pass before the
appliance switches OFF.
4
36
36

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

D 625

Tabla de contenido