6) Guide the TV cables through the poles.
7) To change the vertical angle of the TV-screen, hold the TV tight and loosen the turning knob
(counter clockwise), move and hold the screen into the desired angle while tighten the
turning knob (clockwise).
6. Technical specifications
LCD/plasma size
dimensions
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Components nv. All worldwide rights
reserved. This manual, and when applicable the software described in it, are copyrighted.
No part of this manual or the described software may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder. For
personal back-up purposes, one copy of the included software is permitted.
18/12/2008
max. load
rotation
plate
base
height
weight
WB018
10"-30" / 25-75cm
25kg / 55lbs
40° up/down
190° left/right
115 x 115mm
Ø160mm
625 ~ 880mm
1.7kg
5
© 2008 Velleman Components nv