VelLight LEDC14 Manual Del Usuario página 5

Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.
 Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
For dimmer mode, wire the controller as follows:
6. Operation
On/Off
To turn the lights on or off, press
Dimmer mode
 To increase brightness, press
 To decrease brightness, press
7. Technical Specifications
power supply
maximum load
PWM frequency
V. 01 – 28/03/2013
LEDC14
.
.
12 - 24 VDC
3 x 4 A
± 900 Hz
5
.
©Velleman nv