Publicidad
Idiomas disponibles
Idiomas disponibles
【 【
】 】
SLS Operations
External Connector Instruction
【 【
【 【
】 】
Keypad Functions
: Power on or off the instrument. With the default setting, the SLS
will conserve battery life by automatically turning itself off if no key has
【 【
】 】
been pressed for approximately 5 minutes.
μW/Bm: Press this key to switch the display mode from absolute power
(dBm) to microwatt(μW). The current optical power will be displayed
on LCD.
CW/Mod: Press this key to switch the output of SLS from CW to the
desired modulation frequency.
: Press this key to select the desired wavelength. The current wave-
【 【 λ】 】
length will be displayed on LCD.
OPM510 • OPM520 • SLS520 • SLS525 • SLS530 • SLS535 • SLS536
1. Fiber Optic Output
SLS supplied with SC/PC fiber optic connector
(intechangeable LC/FC/ST). This is a flat polished
】 】
connector; do not connect angle polished connectors
to the bulkhead.
2. Ext. AC Power Jack
SLS can be operated with an External Power Adapter
9V DC@250mA.
15
Publicidad
