Grundfos PowerAdapt Instrucciones De Instalación Y Funcionamiento página 8

5. Mechanical installation
5.1 Mounting the product
The product is designed to be mounted on a flat and
vertical surface. The cable glands must face
downwards.
To ensure sufficient ventilation, allow at
least 200 mm (8") of space on either side
of the cabinet.
1. Drill holes in the surface. Use the measurements
below depending on the cabinet type. For further
information on cabinet types, see the data booklet
of the selected product.
2. Insert wall plugs, if applicable.
3. Fit the four screws in the mounting holes and
cross-tighten them.
W
Dimensions for 16 A
PowerAdapt 3 x 380-415 VAC, 16 A
Pos. Description
W 500 mm
L 500 mm
L1 530 mm
H 250 mm
8
Dimensions for 31 A and 72 A
PowerAdapt 3 x 380-415 VAC, 31 A and 72 A
Pos. Description
W 600 mm
W1 650 mm
L 600 mm
L1 630 mm
H 300 mm
H
W1
W
H