Publicidad
Idiomas disponibles
Idiomas disponibles
•
2014/32/EU (measuring instruments)
and the following standards or normative documents:
ETSI EN 300 330 V2.1.1
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-3 V2.1.1
EN 62368-1 :2020+A11:2020
EN IEC 61851-1:2019
IEC 61851-21-2:2018
EN 61439
EN 62196-1:2015
EN 62196-2:2017
EN 50581:2012
EN 50620:2020
EN 62479:2010
EN 50364:2010
EN IEC 63000:2018
UK Declaration of conformity
We
Juice Technology AG
Kasernenstrasse 2
CH-8184 Bachenbülach
Switzerland
Tel. +41 41 510 02 19
hereby declare in our sole responsibility, that the product:
Juice Technology AG
Juice Services AG
JUICE CHARGER me
EL-JCME*
Juice Power AG
Juice Telemetrics AG
Kasernenstrasse 2
complies with the essential requirements of the following regulations and their amendment
CH-8184 Bachenbülach
info@juice-technology.com
juice-world.com
Phone CH / Intl.
Radio Equipment Regulations 2017
+41-41 510 02 19
Telefon DE
Restriction of Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
0800 3 400 600
MWSt/UID
Juice Technology AG
CHE-236.291.474
DE815511383
The following relevant standards or norms were used for the assessment
Juice Europe GmbH
Friedenheimer Brücke 20
DE-80639 München
Juice Iberia S.L.
EN 300 330 V2.1.1
EN 62479:2010
Calle Medellín 3
ES-29002 Málaga
EN 61439-1:2011
EN 62196-1:2014
EN 50620:2020
IEC 61851-21-2:2018
Juice France SAS
18 Place des Nymphéas
EN IEC 63000:2018
EN 61000-6-2:2005
FR-93420 Villepinte
Juice Nordics AB
Edsbrogatan 1 A
SE-75228 Uppsala
Juice UK and Ireland Ltd
19 Eastbourne Terrace,
Paddington Station
For the standards used for the Measuring Instruments Regulations 2016 see the separate
UK-W2 6LG London
declaration of conformity from the manufacturer.
Juice Americas, Inc.
333 3rd Avenue N.
US-33701 St. Petersburg FL
juice-americas.com
Place:
Date:
Juice Technology Co., Ltd.
Bachenbülach
01.02.2022
Zhejiang
Lishui Digital Building
Lianchuang Street No.153
Future City, Yuhang District
CN-Hangzhou
juice-asia.com
Waren aus EU nur an diese Adresse
goods from EU to this address only:
Feldwiesenstrasse 8
DE-79807 Lottstetten
Installation
The JUICE CHARGER me may only be installed and
commissioned by electrically skilled persons. Install the
JUICE CHARGER me in accordance with the attached
Installation Guide. Always disconnect the power supply
before beginning with installation work.
Protection
It absolutely essential that a residual current device and a
line circuit breaker be installed upstream of the device.
22
EN 50364:2010
EN IEC 61851-1:2019
EN 62196-2:2017
IEC 62955:2018
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 61000-6-3:2007
+A1+A2:2012
Signature:
Christoph R. Erni, CEO
User Manual JUICE CHARGER me [EL-JCME*] V 1.2
The line circuit breaker must be dimensioned in accor-
dance with the charging device's rating plate, the desired
charging power and the given power feeder line (line
length and cross-sectional area) in compliance with the
applicable national regulations. One line circuit breaker is
needed for each charging point.
Mount the device on the wall.
•
Mount the device only on flat surfaces.
•
Implement suitable measures to smooth any uneven
surfaces.
Holes for the mounting screws shall be located and
drilled based on the drilling template included with the
scope of supply. Drill the holes in the wall to the diameter
specified for the selected mounting materials.
•
Route the power supply cable into the device through
one of the two cable entry holes provided for this
purpose (from either below or behind the device).
Clampable cross-sections
•
Fine-wire conductor:
6 mm² - 10 mm² / 10 - 8 AWG
Cable connection
•
Connector cable Type min:
3 x 6 mm² - L1/N/PE
•
Connector cable Type max:
5 x 10 mm² - L1/L2/L3/N/PE
•
Connector cable dia.:
Internet
Connect the JUICE CHARGER me to the Internet via
LAN (RJ45).
Operating modes
RFID activation
RFID activation is set up as a standard feature. You recei-
ve two pre-programmed cards for activation.
Other operating modes
•
Plug and Charge (ISO 15118)
•
Master-slave load management
Changing the operating mode
If you wish to register an additional RFID card or change
your operating mode, you must connect your charging
station to the Internet to do so.
Visit www.juice-world.com/installation to find out what
next steps to take.
dia. 16 - 21mm
Publicidad
