Trixie 40040 Manual De Instrucciones página 10

2.2 Control Panel
For all button indicators: When the selected process is engaged, the
corresponding indicator stays solid on. If paused, it will flash.
Clean: Press once to start a cleaning cycle. If already
started, press it again to pause.
Flatten: Press once to start spreading the litter flat. If
already started, press it again to pause.
Replace: Hold for 3s to start emptying the litter. If
already started, press it once to pause or resume.
Child Lock: Press twice to lock or unlock (status
indicator flashes green twice)
Restore to Factory Settings: Hold
simultaneously for 5s to restore to factory settings.
2.3 Status Indicators
Status Button
Indicators
Indicators
|
Solid Blue
Flashing
Solid Green
Flashing Green
Flashing Green
Twice
Solid Red
Flashing
10
and
Function
description
Ready for use or working
Firmware upgrading
Restoring to factory
settings
Cat / weight detected when
stationary
Drum returning to Home
position
Child Lock on/off
Clean / Flatten / Replace
paused
Cat / weight detected when
rotating
Foreign object approached
when rotating
Rear cover opened
Drum not in place
Motor error
Part III Installation and Operation
3.1 Setting Up
Place the litter box indoors on a firm, level surface and in a cool, dry
location. Do not touch any walls. Leave a little space around.
3.2 Turn On
Make sure the cable is not stuck in the rotating shaft. Keep the cable
away from cats.

Place the drum on the
base.
Note: The rotating shaft
of the drum should be
inserted into the slot of
the base support.

Insert the rear cover into
the slot of the base.

Open the waste bin cover
to take out adapter, plug
adapter in the litter box.

Plug in the litter box. The
drum will rotate a full
circle automatically. Wait
for it to return to Home
position, then the unit is
ready for use.