3M PG II Manual Del Propietário página 20

Accessories
Bench Mount for 3M™ Hot Melt Applicator PG II
A special bench mount assembly is available which allows the
3M Hot Melt Applicator PG II to be mounted in a 45° position and
operated with a foot pedal. It is adjustable to allow positioning of
the nozzle tip from a minimum of 9 1/2" (24.1 cm) to a maximum of
15 1/2" (39.4 cm) from the bench top. A nozzle adaptor that directs
adhesive flow straight down is included in addition to the foot
pedal unit.
Speedloader Magazine Feed for 3M Hot Melt
Applicator PG II
The 3M Hot Melt Applicator PG II can be modified into a semi-
automatic loading mode by the addition of the Speedloader
Magazine Feed. By simply pushing a lever to the rear, the magazine
feeds a new stick of adhesive into the melt chamber. Sticks won't
jam. The magazine holds 12, 3M™ Hot Melt Adhesive sticks,
reduces the need for frequent reloading and helps increase
production. It is ideal for hands-free benchtop applications in
packaging and assembly.
20
Bench mounted 3M Hot Melt Applicator PG II with
Speedloader Magazine Feed.
© 3M 2020.