Beyerdynamic SPACE MAX Instrucciones De Uso página 10

Operation
Connection displays
LED display of the connection status:
Bluetooth®:
Pairing/recognition possible
Bluetooth®:
Connected
Bluetooth :
®
Connectable / connection lost
Connected to USB
Connecting two speakerphones to form
a stereo pair (for music playback)
Establish a connection
1 . Press the
button and the
simultaneously for 1 to 3 sec on the first
SPACE MAX device.
2 . Press the button and the
simultaneously for 1 to 3 sec on the second
SPACE MAX device.
The two SPACE MAX devices connect via
True Wireless.
When the two devices are successfully
paired, you will hear "cascade successful"
Disconnect
9 Check that both SPACE MAX devices are connected.
► Briefly press the
simultaneously on both SPACE MAX devices.
The Bluetooth® connection between the two devices
(cascading) is deleted.
Conference cascade connection
The connection is intended for connecting two
beyerdynamic SPACE MAX devices in conference
cascade mode. For this, two speaker phones are
connected via the jack socket with a beyerdynamic
cascading cable (to be ordered). Pairing with the output
device is done via one of the two speaker phones
connected with the cable.
10/14
Flashes blue
and red
alternately
Steady blue
Flashes blue
Entire LED
ring lights up
button
Flashes
red
button
Flashes
red
button and the button
Multi-point operation
The beyerdynamic SPACE MAX Speakerphone can be
paired with several Bluetooth®-enabled devices.
In normal mode, up to eight devices can be paired.
In business mode, only one device can be paired.
Active connections are possible with up to two devices at
a time. However, playback of music and phone operation
is only possible with one device at a time. Phone opera-
tion has priority over playback of music, i.e. playback of
music is interrupted during phone calls.
Priority list when using the playback devices (PD):
PRI . Profile
1 HFP (phone operation) PD 1 (device used first)
2 HFP (phone operation) PD 2 (device used second)
white
3 A2DP
(playback of music)
4 A2DP
(playback of music)
Setting up multi point:
1 . Connect the Speakerphone to the first device (see
„Pairing with a device via Bluetooth®" on page <?>).
2 . Deactivate the Bluetooth® connection on the first
device.
3 . Connect the Speakerphone to the second device (see
„Pairing with a device via Bluetooth®" on page <?>).
4 . Reactivate the Bluetooth® connection of the first
device that automatically connects to the product.
Once both devices are paired with the Speakerphone,
the speakerphone connects to both devices each time
it is switched on.
Using multi point:
9 If you have connected the speakerphone with two
devices and have just activated media playback:
► Briefly press the
incoming call.
9 If you have connected the speakerphone to two
devices and have just ended a call:
► Briefly press the
playback that was last played.
Adjusting the volume
To increase/decrease the volume:
► In stages: Briefly press the
► Continuously: Hold down the
A signal tone sounds when the maximum/minimum
volume is reached.
LED display for volume control:
White:
zero*–full volume**
*) At a volume close to zero LEDs except one (lit 50%) are off .
**) At full volume, all LEDs are on (ring illuminated white) .
Playback devices (PD)
PD 1 (device used first)
PD 2 (device used second)
button once to accept an
button once to start the media
/
/
beyerdynamic SPACE MAX Speakerphone
button.
button.
–