Publicidad
Idiomas disponibles
Idiomas disponibles
First steps
Hang up (red LED display)
Pick up (green LED display)
Segmented battery status
(green/yellow/red LED display)
Bluetooth® (blue LED display)
FIRST STEPS
Removing from packaging and storing
► When not in use and for transport, store the
beyerdynamic SPACE MAX Speakerphone and
accessories in the carrying case.
This provides the best protection and prevents damage.
Securing your Speakerphone
The Speakerphone has a 1/4" threaded hole in the centre
of its underside, which can be used to screw it onto a
tripod, for example.
Charging the battery
We recommend you use only the supplied USB cable to
charge the battery.
1 . Use the cable supplied to connect the beyerdynamic
SPACE MAX Speakerphone to any standard-com-
pliant live USB-C socket (e.g. USB power adapter) via
the USB-C port. If necessary, use a USB adapter (see
„Scope of delivery" on page 7).
2 . Remove the USB cable after charging.
Quick charge
The speaker phone can be charged quickly via USB-PD
(USB Power Delivery) using the primary USB-C connector.
To quickly charge the device's battery, the power
consumption must be up to 30 W depending on the
charger's performance according to the PPS (program-
mable power supply protocol) of the USB-PD 3.0 standard.
Remarks on the life of Li-ion batteries
• When fully charged, disconnect the USB cable from
the charging unit and the beyerdynamic SPACE MAX
Speakerphone.
• CAUTION! High temperatures, especially with a high
charge level, can cause irreversible damage.
• If the battery is not used or is stored for extended
periods of time, it is recommended to charge it to
approx. 50 % and store it at no more than 20 °C.
• Switch off the battery-powered product after use.
Power bank function
The beyerdynamic SPACE MAX Speakerphone can also
be used to charge other devices (e.g. smartphones).
► Connect the device to be charged (e.g. smartphone) to
the beyerdynamic SPACE MAX Speakerphone with the
secondary USB-C port using the USB cable.
Charging starts automatically. An LED next to the
USB-C port indicates that an external device is being
charged. The LED lights up red.
8/14
Displaying the battery charge level
► Briefly press the
The charge level is displayed via the LED ring.
Using the product with a USB cable
connection
You can operate the beyerdynamic SPACE MAX Speaker-
phone with a PC or laptop using a USB cable connection.
1 . Switch on the laptop/PC.
2 . Connect the beyerdynamic SPACE MAX Speakerphone
with the desired computer using the enclosed USB
cable and the USB port.
If necessary, use a USB adapter (USB-C to USB-A, see
„Scope of delivery" on page 7).
3 . If the speakerphone has not come on automatically,
switch it on with the on/off switch.
LED display of charge level:
Red*:
Battery 0–25 % full
Yellow:
Battery 25–62.5 % full
Green:
Battery 62.5–100 % full
*) The LED flashes when the charge level is close to zero
Using the product with Bluetooth®
connection
You can operate the beyerdynamic SPACE MAX Speak-
erphone via Bluetooth® with a smartphone or PC. For this,
the Bluetooth®function must be active, and the speak-
erphone must be paired with the output device. You can
find instructions on how to operate the product under
„Operation" on page 9.
SOFTWARE UPDATE
Firmware updates are carried out via USB-HID
using the beyerdynamic Update Hub. The soft-
ware for updating the product can be down-
loaded here:
https://byr.li/firmwareupdate
The device has a firmware update function
(DFU) via USB connection to a PC (Windows and
Mac OS).
During the update process, the LED ring flashes
magenta.
beyerdynamic SPACE MAX Speakerphone
button once.
–
–
–
Publicidad
