Publicidad
Idiomas disponibles
Idiomas disponibles
30 OPERATION
OPERATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the
IMPORTANT SAFETY INSTRUCTIONS, before operating this dryer.
Using the Dryer
Lint
Filter
1 Clean the Lint Filter
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
performance. Make sure to reinstall the filter, pressing down until it clicks firmly
into place. The dryer will not operate without the lint filter in place.
2 Load the Dryer
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
3 Turn on The Dryer
Press the Encendido/Apagado (Power) button to turn on the dryer. The cycle
LEDs will illuminate and a chime will sound.
4 Select a Cycle
Turn the cycle selector knob in either direction until the LED for the desired
cycle is on. The preset temperature, dry level, and option settings for that cycle
will be shown. Default settings for the selected cycle can now be changed if
desired. Refer to the Cycle Setting and Options page for details.
NOTE
Not all options or modifiers are available on all cycles. A different chime will
sound and the LED will not come on if the selection is not allowed.
5 Begin the Cycle
Press the Inicio/Pausa(Start/Pause) button to begin the cycle. The cycle can
be paused at any time either by opening the door or by pressing the Inicio/
Pausa(Start/Pause) button. If the cycle is not restarted within 60 minutes of be-
ing paused, the dryer will shut off and the settings will be lost.
6 End of Cycle
When the cycle is finished, the chime will sound. Immediately remove your
clothing from the dryer to reduce wrinkling. If Anti Arrugas(Wrinkle Care) is
selected, the dryer will tumble briefly every few minutes to help prevent wrinkles
from setting in the clothes.
Publicidad
