Roadstar HIF-1996BT Manual De Instrucciones página 8

3 English
twice to clear programme.
LISTENING TO RECORDS
VERY IMPORTANT!
To prevent damages from transportation, a transit screw is located at the upper right side of the
turntable platform. Before start playing, use a screwdriver and turn the transit screw in clockwise di-
rection (screw going down) completely. In case of transportation, remember to clock again this
screw in counter-clockwise direction to prevent damages.
1. Press PHONO (12) to select PHONO function. "PHO" will be shown on the display.
2. Open the Record Player Cover. Release the Tonearm Clamp, and remove the stylus protector.
Place a record on the turntable, over the central spindle. Place the EP adapter over the central
spindle when playing 17cm EP records.
3. Set 33/45/78 RPM SPEED SELECTOR (32) to 33 / 45 / 78 rpm according to the record.
4. Lift the Tonearm with the Tonearm Lift Lever. Move the tonearm to the beginning of the record,
or to the start of a particular track. Gently lower the tone arm onto the record with the Tonearm
Lift lever to start playing.
5. When the record is finished the tonearm will automatically stop and return automatically to the
rest. To stop manually, lift the tonearm from the record and return it to the rest.
6. Moving or jarring the turntable without securing the Tonearm clamp could result in damage to
the Tonearm. Replace the protective cap on the stylus when not in use.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device like MP3
players, CD players and allow playback of your external source through the system speakers.
1. Use an audio cable (not included) with a RCA stereo plugs on one end of the cable. Plug one
end into the AUX-IN jack on the main unit and plug the other end of the cable into the LINE OUT
or HEADPHONE Jack of your external audio device.
2. Turn ON the unit and your external audio device. Press AUX (13) to select AUX function. "AUX"
will be shown on the display.
3. Start to play the external device (see the user manual of the external device).
BLUETOOTH OPERATION
1. Press BT (9) to select BLUETOOTH function. "BT" will be shown on the display.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tagged as HIF-
1996BT, then confirm connection.
3. When the pairing is successful the LED will stop blinking.
4. Now you can transfer the music to the HIF-1996BT and all operations can only be operated
from your mobile device.
PLAYBACK FROM USB
1. Insert the USB device's plug into the USB socket.
2. Press CD/USB (10) repeatedly to select USB mode. "USB" will be shown on the display.
3. The unit will start reading the device automatically after the connection.
4. Use the same procedure as CD to listen to your USB/SD device.
DELETE USB
1. During playback, press and hold REC (18) (4 on remote). "DEL" will be shown on the display.
2. Press SKIP -/+ (16/17) (12/13 on remote) repeatedly to select between ONE/FOLDER/ALL.
3. Press REC (18) (4 on remote) again to confirm.