Proper Use; Device Description - MAGLOGIX MagnaJig MX-1500 Manual De Instrucciones

Proper Use

The MagnaJig™ Magnetic Clamp (MX-1500) is a switchable magnetic clamp equipped with permanent magnets
and is designed for attachment to ferromagnetic, metallic workpieces. The MX-1500 may only be used according to
its technical data and determination. Proper use includes adherence to the start-up, operating, environment and
maintenance conditions specified by the manufacturer. The user bears sole responsibility for understanding this
operating manual as well as for the proper use and maintenance of this magnetic clamp. Please contact the
manufacturer if you have any questions prior to using this device.

Device Description

Surrounded by an aluminum housing (B), the MX-1500 Magnetic Clamp's special design has a tightly compacted
(shallow-profile) magnetic field that develops an incredible attractive force especially on thin ferromagnetic
materials of less than 10 mm. The MX-1500 Magnetic Clamp is switchable (ON/OFF) by means of a 60° manual
activation lever (A). When switched and locked into the ON position, internal permanent magnets generate a
powerful magnetic field into the magnetic contact area (E) and hold a ferromagnetic, metallic workpiece with
incredible force. To deactivate the Magnetic Clamp, first lift the activation lever at its far end upwards to disengage
the lever from its latching notch and return by 60° into the OFF position.
Note: Care must be taken because the activation lever can quickly/strongly spring back to the OFF position
when working on thin materials.
Multiple threaded holes (C) and precise round holes (D) for Special, Modified Mounting Applications are located
on three sides of the magnetic clamp.
Be sure to read the operation instructions completely before using the Magnetic Clamp for the
first time!
A) Activation lever
B) Aluminum housing
C) Threaded holes for attachment
D) Holes for cylinder pins
E) Magnetic contact area
4