Black and Decker QUICK CAFE CM1240 Manual De Uso Y Cuidado página 5

Idiomas disponibles

HOW TO US E

This product is for household use only.

GETTING STARTED

Remove all packing material, any stickers, and the plastic band around the

power plug.

Go to www.prodprotect.com/blackanddecker to register your product.

Wash removable parts as instructed in CARE AND CLEANING.

Clean the inside of your coffeemaker by running two full brewing cycles with

water only, no coffee.

a. Pour fresh, cold water into the water reservoir up to the 10-cup mark,

then place carafe onto the carafe plate.

b. Plug cord into standard electrical outlet.

c. Push the BREW NOW button to immediately brew water through the

coffeemaker without adding coffee.

d. Once the cycle is finished, discard water.

e. Turn off appliance, unplug and allow to cool down for 15 minutes

before repeating.

PROGRAMMING YOUR COFFEE MAKER

Setting the Digital Clock

Plug the coffeemaker into a

standard electrical outlet.

The numbers and colon ":" on

the digital clock display flashes

"12:00".

Press HOUR and MIN buttons until

the correct time appears on the display. The colon ":" will continue to

flash even after the time is set.

When the time passes noon, the LED light in the display next to PM

illuminates to let you know you are in PM time. If the PM light is not

illuminated it is AM time.

To change the time after it has been set, press either HOUR or MIN

once to enter the time setting mode. Then follow the steps above.

Note: If the appliance is unplugged or power is interrupted even

momentarily, the time may need to be reset.

CM1240B_29052_ES_IB_A.indd 5

4/20/22 4:49 PM