Aiwa CT-Z110 Manual De Instrucciones página 9

Activating the timer
1
With the unit on, press INFO.
The "MY INFO" indicator lights up and the
timer is activated.
The "MY INFO" indicator flashes between
turn-on time and turn-off time.
To cancel the timer
Press INFO again so that the "MY INFO" indicator
disappears.
To check the setting
With the unit off, press INFO.
The turn-on time, followed by the radio frequency
and the turn-off time, appears in the display
window, each for 1 second, then the unit turns off.
Notes
• Even if the unit is in a mode other than Radio
mode, the unit switches to Radio mode and tunes
in the preset radio program at the preset time
automatically. When the program is over, the unit
returns to the former mode automatically.
• When this function is activated, TUNE i/k, A.ME/
PS, LO, INFO, and the preset number buttons do
not work for tuning in stations.
• Even if the unit is turned off and on, this function
is active until turn-off time.
• Even if you are listening to a radio program with
this function, pressing FUNC switches the unit
to another mode. If you switch modes with
FUNC, the unit does not turn off at the turn-off
time of the timer.
TAPE PLAYBACK
1
Insert a cassette to start playback.
If a cassette is already inserted, press FUNC
repeatedly to select Tape Play mode to start
playback.
Playback starts in the direction that the unit
played back previously.
2
Adjust the volume with the Jog Dial.
Press the following buttons to operate tape
transport.
To do this Press this button
Eject the cassette*
Change the playback
side
simultaneously
Fast-forward either side
of the tape
Rewind either side of
the tape
Stop fast transport and
resume playback
* When you eject the cassette, the unit switches to the
previous mode.
When a cassette is inserted,
can be pressed to eject the cassette.
** Do not press or all the way. Doing so may
change the direction of tape transport.
CTZ110(YU)-total-En-9
and
or lightly**
comes up so that it
continued
8
ENGLISH