Peaq MUNET SMART PMN300-B Manual De Instrucciones página 27

Bluetooth connection
1. Connect the supplied adaptor to the power inlet. Connect the adaptor to a
suitable wall outlet.
2. Activate Bluetooth on audio source (e.g. mobile phone). Browse for devices and
select "My Munet xxxxxx * ".
3. Establish connection. If necessary, enter password 0000.
4. If necessary, select "My Munet xxxxxx * " as audio output device.
Notes:
• No installation of the Munet App required.
• Only one Bluetooth connection is possible at a time.
• In order to connect another audio source with Bluetooth, the previous connected
device must be disconnected.
* For "xxxxxx" use the WiFi Mac address of the individual speaker.
PMN300_A5_140107 (1.10).indb 27
ENGLISH
5V 500mA
WiFi
AUX IN
USB
27
8/1/14 4:16 pm