INSTALLATION
1.
In the U.S.A., this appliance must be installed in
accordance with the local code and the relevant
national code:
ANSI Z223.1/NFPA 54, National Fuel Gas Code
ANSI/NFPA 58, Storage and Handling of Liquefied
Petroleum Gases
2.
In Canada, this appliance must be installed in
accordance with the local code and the relevant CSA
standards:
CSA-B149.1 Natural Gas and Propane installation Code
CSA-B149.2 Propane Storage and Handling
3.
The appliance must be located away from combustible
surfaces by at least 3m / 10feet from each side, and
3m / 10feet from the rear.
4.
Do not operate this appliance under any overhead roof
construction or foliage.
5.
This appliance is for OUTDOOR USE ONLY, DO NOT
operate in garage, shed, balcony or other such
enclosed areas.
6.
DO NOT restrict the flow of air to the appliance.
7.
Keep the area surrounding the appliance free of
combustible materials, gasoline, and all flammable
liquids and vapors.
8.
This appliance is not intended to be installed in, or on,
recreational vehicles and/or boats.
9.
Keep the ventilation opening(s) of the cylinder
enclosure free and clear from debris.
10. Keep the fuel supply hose away from any heated
surface(s)
11. Not intended for commercial use.
3