Manuales relacionados para Samuel Heath V613
Resumen de contenidos para Samuel Heath V613
- Página 1 Product Data Sheet V613 / V613-A 3 Hole Bidet Filler With Pop-Up Waste PLEASE NOTE: It is essential to install none return valves as part of the bidet system. - Available Control Options - V6K13X V6K13D V6K13M V6K13MB V6K13XB V6K13L...
- Página 3 Dimension Key V6K13M / V6K13MB V6K13X / V6K13XB...
- Página 4 Dimension Key V6K13D V6K13L...
- Página 5 Dimension Key V6KA13M / V6KA13MB V6KA13X / V6KA13XB...
- Página 6 Dimension Key V6KA13D V6KA13L...
- Página 7 Flow Rates The flow rate data provided in this document is indicative of each product and is given in an open outlet condition. Installation design, external connections and fittings not supplied may affect the data provided.
- Página 8 Spares Information V613 Item Part No. Description Basin Spout VS56074 CD Valve (Anti-Clockwise Closing) VS56075 CD Valve (Clockwise Closing) Basin Side Body O-Rings (x2) Side Body Spindle Screw Flexi Tail Waste Outlet...
- Página 9 Spares Information V613-A Item Part No. Description Basin Spout VS56078 CD Valve (Anti-Clockwise Closing) VS56079 CD Valve (Clockwise Closing) Basin Side Body O-Rings (x2) Side Body Spindle Screw Waste Pop-Up...
- Página 10 Control Assembly Instructions 1. Remove screw (A) and washer (B) from spindle 2. Position cross top (C) to tap body and assemble anti-rotational washer (B) followed by screw (A). Note: It is imperative that the anti-rotational washer is installed 3. Levers are also available (Assembly method is identical). Position lever at the preferred angle.
- Página 11 Luxe Lever Assembly Instructions Place adapter (A) onto the side valve spindle. 2. Align the adapter (A) using assembly guide screw (B) to mimic the desired position of the Luxe Lever. 3. Carefully remove screw (B) and secure adapter using screw (C) and washer (D).
- Página 12 V613-A Waste Set Up 1. Assemble the drain to the basin. 2. Assemble the spout to the deck with the pop-up rod in position as shown above.
- Página 13 V613-A Waste Set Up 3. Assemble the ball rod to the drain. 4. Bend the metal strap to link the pop-up rod as shown above. 5. Secure the metal strap in place using wing nut and retainer clip.
- Página 14 V613-A Waste Set Up 6. Adjust the position of the metal strap to allow the pop-up waste to action correctly.
- Página 15 V613-A Waste Set Up Note: Alternatively, the ball rod and pop-up rod can be joined with the Joining Block (illustrated above).
- Página 16 5. Ceramic cartridges in hard water areas. To prolong the lifespan and reduce servicing periods of your Samuel Heath tap we recommend that a suitable water softener be fitted. Consult your installer/designer for details.