Manuales relacionados para Samuel Heath V619
Resumen de contenidos para Samuel Heath V619
- Página 1 Product Data Sheet V619 / V619-AUS Single Lever Bidet Mixer With Pop-Up Waste PLEASE NOTE: It is essential to install none return valves as part of the bidet system. - Available Control Options - V6K19M / V6KA19M V6K19MB / V6KA19MB...
- Página 3 Dimension Key V6K19M / V6K19MB V6K19L...
- Página 4 Dimension Key V6KA19M / V6KA19MB V6KA19L...
- Página 5 Flow Rates The flow rate data provided in this document is indicative of each product and is given in an open outlet condition. Installation design, external connections and fittings not supplied may affect the data provided.
- Página 6 Spares Information V6K19 Item Part No. Description Screw Washer Main Cap Locking Ring O-Ring VS56039 Cartridge C Washer Kit - Small Flow Straightener Pop-Up Waste Flex Tail...
- Página 7 Spares Information V6KA19 Item Part No. Description Screw Washer Main Cap Locking Ring O-Ring VS56039 Cartridge C Washer Kit - Small Flow Straightener Pop-Up Waste - US 1” BSP Flex Tail...
- Página 8 Control Assembly Instructions 1. Remove screw (A) and washer (B) from spindle 2. Position cross top (C) to tap body and assemble anti-rotational washer (B) followed by screw (A). Note: It is imperative that the anti-rotational washer is installed 3. Levers are also available (Assembly method is identical). Position lever at the preferred angle.
- Página 9 Luxe Lever Assembly Instructions Place adapter (A) onto the side valve spindle. 2. Align the adapter (A) using assembly guide screw (B) to mimic the desired position of the Luxe Lever. 3. Carefully remove screw (B) and secure adapter using screw (C) and washer (D).
- Página 10 V619-A Waste Set Up 1. Assemble the drain to the basin. 2. Assemble the spout to the deck with the pop-up rod in position as shown above.
- Página 11 V619-A Waste Set Up 3. Assemble the ball rod to the drain. 4. Bend the metal strap to link the pop-up rod as shown above. 5. Secure the metal strap in place using wing nut and retainer clip.
- Página 12 V619-A Waste Set Up 6. Adjust the position of the metal strap to allow the pop-up waste to action correctly.
- Página 13 V619-A Waste Set Up Note: Alternatively, the ball rod and pop-up rod can be joined with the Joining Block (illustrated above).
- Página 16 5. Ceramic cartridges in hard water areas. To prolong the lifespan and reduce servicing periods of your Samuel Heath tap we recommend that a suitable water softener be fitted. Consult your installer/designer for details.